Sometime ago, I started tests of zero-bias detectors as a side project, and it evolved in a full Microwave Power Meter system. The system is able to measure powers from -40dbm to 15dbm (55dB of input dynamic range) at frequencies from 100MHz to 6GHz (probably up to 10GHz).
You Might Also Like...
Power Meter - Calibration
For proper operation of the Microwave Power Meter [https://gusbertianalog.
3 min read
Power Meter - Front-end and Digital Section
As explained in the article about the RF Probe [https:
4 min read